This is a “review” of the ACMER R10 Laser Engraving Enclosure Box, uncompensated and purchased myself. My desire here is to provide hopefully, helpful feedback and information for users to consider. It's a decent value for its price range. Its design in its current state pretty much makes it airtight because of its zippered bottom and I didn't have any trouble with it being able to evacuate the smoke. The vent hose extends out to 8 ft, I didn't need to go that far so I didn't test that. The window material is the same color as any of the other...

I've experimented and explored a few of the different ways to align project cuts on material, had a little bit of extra time and just came up with a quick way to facilitate doing so. A little bit of thought went into it, and more time into making the video and writing up the instructions and description then actually into designing, cutting, and assembly. Use it if you wish, or not. You can download the project files HERE Making The Finder: Use 3 mm ply or acrylic. You may have to set the kerf in your laser software if you want...

I'm currently in process of working with and getting to know the P2 a bit better, and running it through various projects and tests. I really can't justify doing a full review until after I have a good number of hours under the belt with it but I will point out a few of these observations so far. unpackaging and the few minutes of minor assembly went very fast and without any issues. It was packaged very well, and the instructions although basic are pretty straightforward and nicely, right to the point. I was up and running with it in about...