Slider

Artillery Genius Simplify 3D Factory Profile

Genius_S3D_FFF
Artillery Genius Simplify 3D Factory Profile       This is the default profile we use at the studios here. Great starting point, and easy to modify for various layers if you wish, as the settings work well across 0.20, 0.16(default), and 0.12. Just import it into S3D. File>Import FFF Profile and you are good to go.   It can be downloaded from our file sections  HERE   ~Enjoy!    
  326 Hits
  0 Comments
326 Hits
0 Comments

Artillery Genius Cura 4.2.1 Machine Settings & Profile Released...

Genius_Video_Cura
Artillery Genius Cura Base MACHINE Profile This is the full machine settings and profile package.     Created for and tested with Cura 4.2.1 Nozzle sizes included:0.4, 0.6, 0.8, and 1.0...   It can be downloaded from our file area HERE   Instructions: Backup your settings. Copy the files to their respective folders, and import the profile base.   /resources/definitions /resources/extruder /resources/meshes /resources/variants   Also includes the base profile, which is: Set for 0.16 Layer Height Tested with Cura 4.21   The base profile is in the root folder of the package.   Heres a quick help video for those that need it... (The video is for the Sidewinder X1, the installation is exactly the same)     ~Enjoy!      
  532 Hits
  0 Comments
532 Hits
0 Comments

Artillery Sidewinder X1 Mods: Extruder Ribbon Cable Strain Relief

3DN_SX1_EXT_Support_COVER
Early on when Artillery released the Sidewinder X1, Like a number of other users I had one of the machines in our studios display the behavior we all know now as "ribbon cable" related- Extruder clicking, erratic X-carriage movement, and even the LCD showing a -15 temperature reading. The reason was evident (after checking the Z pillar connection for integrity) it was at the extruder-to-cable connection. Of course the recommended fix is to reseat or swap the ribbon cable; pretty easy but I wasnt satisfied with the possibility of it happening again so I decided to fix it then, or at least experiment and come to a conclusion after a period of time. If your board has already been burnt, you must obviously replace that as well. I dont like replacing boards, and without a correction of some kind you are just setting yourself up for failure again. Dont.   I...
Continue reading
  10508 Hits
  0 Comments
10508 Hits
0 Comments

Artillery Sidewinder X1 Simplify 3D Profile: Codename "Sweetness"

3DN_SWX1_S3D
Artillery Sidewinder X1 Simplify 3D Profile: Codename "Sweetness"     This is the default profile we use at the studios here. Its been flawless, and easy to modify for various layers if you wish, as the settings work well across 0.20, 0.16(default), and 0.12. Just import it into S3D. File>Import FFF Profile and you are good to go.   It can be downloaded from our file sections HERE   ~Enjoy.    
  13980 Hits
  0 Comments
13980 Hits
0 Comments

Artillery Sidewinder X1 Cura 4.2.1 Machine Settings & Profile Released...

3DN_SWX1_CURA
Artillery Sidewinder X1 Cura Base MACHINE Profile This is the full machine settings profile.     Created for and tested with Cura 4.2.1 UPDATE: Nozzle sizes included:0.4, 0.6, 0.8, and 1.0...   It can be downloaded from our file area HERE   Instructions: Backup your settings. Copy the files to their respective folders, and import the profile base.   /resources/definitions /resources/extruder /resources/meshes /resources/variants   Also includes the base profile, which is: Set for 0.16 Layer Height Tested with Cura 4.21   The base profile can also be downloaded individually from the file area.   Heres a quick help video for those that need it...     ~Enjoy!      
  15847 Hits
  0 Comments
15847 Hits
0 Comments
Grid view
List view
  • Friday March 22

    Original Prusa 3D Printers

          Prusa Research was founded as a one-man startup in 2012 by Josef Prusa, a Czech hobbyist, maker and inventor - and now one of the most famous names in the 3D printing industry. You know, the guy in the photo below... Josef found his passion for 3D…

  • Sunday March 31

    Manufacturer Models: Creality

      Not all models or variations might be shown here. We try to keep this updated as often as possible but always check the groups and manufacturer sites for updates as well!                    ~3D Nexus   Creality Ender 3 Printers Creality 1…

  • Thursday November 14

    Artillery Genius Simplify 3D…

    Artillery Genius Simplify 3D Factory Profile       This is the default profile we use at the studios here. Great starting point, and easy to modify for various layers if you wish, as the settings work well across 0.20, 0.16(default), and 0.12. Just import it into S3D. File>Import FFF…

  • Friday February 15

    3D Printing Safety: Angus…

    I 'm not one for always trying to re-invent the wheel, and for both new and experienced 3D printer enthusiasts sometimes it's just plain good to take a look at things to consider when using your machines . This first video covers FDM printing. Resin Printing (SLA/DLP/DUV, ect.) has other…

  • Saturday March 23

    Casting and Mold Making...

      Casting:    Its' a  manufacturing  process in which a liquid material is usually poured into a  mold , which contains a hollow cavity of the desired shape, and then allowed to solidify. The solidified part is also known as a  casting , which is ejected or broken out of…

  • Wednesday February 20

    Creality 3D Printers

     

    Slider
      Shenzhen Creality 3D Technology Co., Ltd, founded in April 2014, a high-tech enterprise specializing in the  OEM/ODM & sales of 3D printers,  owns two series of DIY and Whole machines, fully meeting the needs of different users.       The products have passed many international quality and environmental certifications such…


Copyright © 2017-2019 Earl Miller. All Rights Reserved. No part of this site may be reproduced without express consent by the owners for their respective content. 3D-Nexus is a creative IP (intellectual property) soley owned by Earl Miller.